DIY : Door Desk

So what do you do when you want an "L" shaped desk but you are cheap? You make one out of two doors. Here is how I made mine.

Here are the supplies I used and about how much I spent.
DIY Table

(2) 24"x80" interior doors - $20/each = $40

(2) 29" table legs - $12/each = $24

White interior latex paint = $10

Wipe-on polyurethane (clear gloss) = $10

29" high bookshelf = free
(Make sure the bookshelf is the same height as your table legs.)

(4) "L" brackets and (1) flat bracket = about $4

Piece of lumber sized 1"x2"x96" = $8
(The wood board needs to be about the same length as long side of a door + short side of door, which for me was 80" + 24" = 104", but 96" was plenty long enough to support it.)

TOTAL for entire desk = about $96


The first step is mounting the wood board to the wall. This is going to support one side of the desk, like this:
IMG_4325
My bookshelf and table legs were all 29" tall, so we obviously mounted the board so that the top of it was at a height of 29".

Before you start to put together the rest of the components, paint everything white.

Next attach the two table legs to one side of a door. I didn't take a picture but it looked like this, thanks Google.












Then it's simply a matter of setting the doors onto their various supporting elements. One door is supported by the bookshelf on one end, and the wood board on the other.
IMG_4329

The other door is supported by the two legs on one side, and the board on the other.
IMG_4328

We used a little wood glue on top of the wall board and on top of the bookshelf to keep the doors from sliding. Then connect everything together with the brackets and drill a hole where you want your computer cord. Finally I wiped on two coats of clear polyurethane after it was all put together.

Done and done my friends.
IMG_4314
Now you're all very sick of my office. I'll talk about something else tomorrow I prom prom promise.